Blackmagic Design

URSA Viewfinder

$2,285.00
  • Blackmagic Design - URSA Viewfinder - CineStore.com.au
  • Blackmagic Design - URSA Viewfinder - CineStore.com.au
  • Blackmagic Design - URSA Viewfinder - CineStore.com.au

Blackmagic Design

URSA Viewfinder

$2,285.00

If your project calls for a lot of over the shoulder or handheld shooting, you’ll want to add the Blackmagic Design URSA Viewfinder.

You get a high resolution 1920 x 1080 color display that lets you get incredibly accurate focus and the screen is so sharp that it’s impossible to see any individual pixels so it’s just like using an optical viewfinder on a traditional film camera.

The viewfinder can be adjusted for either left or right eye use. Simply plug it into the power and SDI viewfinder output, slide it onto the camera using the Shoulder Mount Kit, then start shooting! The viewfinder features a sensor that turns off the screen when you’re not using it to save power and extend the life of the OLED screen.

CineStore Part # CINEURSANEVFP • Manufacturer Part # CINEURSANEVFP

  • Overview
  • Specs
  • Gallery
  • Reviews

The Blackmagic URSA Viewfinder is designed specifically for use with the URSA and URSA mini digital film cameras. It features a high-resolution 1920 x 1080 color OLED display, precision glass optics, and an adjustable diopter to fine tune to your vision. It also has a built-in digital focus chart to help when focusing on your subjects. To boost the longevity of the OLED screen, the viewfinder uses a built-in sensor that only turns the screen on when you're looking through it. It screws directly onto the top of your URSA camera and is adjustable, so it can be used with the left or right eye.

Note: Blackmagic URSA Mini Shoulder kit is required for mounting the URSA Viewfinder on URSA Mini, URSA Mini Pro, or URSA Broadcast.

Key Features

Designed for Blackmagic URSA and URSA Mini

1920 x 1080 OLED screen

Glass optics

Adjustable diopter

Digital focus chart

Eye-sensor turns OLED screen off when not in use to preserve screen life

Built-in record light

Left and right eye switchable

CONNECTIONS
SDI Video Inputs

1 x 3G-SDI BNC.

Power Input

1 x 4 pin XLR 12V.

Computer Interface

USB 2.0 Mini-B port for software updates.

FEATURES
Display Resolution

Full 1920 x 1080

Frame Rate

Up to 60fps

Display Type

OLED

Display Pixels

6.22 Million Pixels

Colour Precision

24 bit RGB, 16.7 million colors

Focus

4 Element diopter

Diopter Range

-4 to +3

Controls

Buttons for settings, short cut features and navigating menus.

Overlays

Built in overlay display processor and top mounted buttons.

Eyepiece

Can be tilted vertically and extended for left or right eye use.

Tally

LED tally light.

Mounting Options

Camera mount with adjustment.

Metadata Support

Detects camera information embedded in the SDI signal from URSA, URSA Mini and Blackmagic 3G-SDI Shield for Arduino.

OPERATING SYSTEMS
Macintosh

Mac 10.12 Sierra,  Mac 10.13 High Sierra or later.

Windows

Windows 8.1 or Windows 10.  

POWER REQUIREMENTS

12V power input via 4 pin XLR connected via 12v power output.

PHYSICAL SPECIFICATIONS
Dimension (LxWxH)

159.51 x 200.91 x 67.82

ENVIRONMENTAL SPECIFICATIONS
Operating Temperature

0° to 40° C (32° to 104° F)

Storage Temperature

-20° to 60° C (-4° to 140° F)

Relative Humidity

0% to 90% non-condensing

WHAT'S INCLUDED

Blackmagic URSA Viewfinder

3/8 inch viewfinder mounting thumb screw for URSA

RECOMMENDED ACCESSORIES

Blackmagic URSA Mini Shoulder kit is required for mounting URSA Viewfinder on URSA Mini or URSA Mini Pro.

WARRANTY

12 Month Limited Manufacturer’s Warranty.